双层毛细芯对环路热管传热性能的实验分析

环路热管作为一种高效的相变传热装置,其性能与位于蒸发器和储液槽之间的毛细芯结构密切相关。为了更深入研究双层毛细芯对环路热管传热性能的影响,利用不同颗粒直径铜粉制备双层毛细芯,在毛细芯总厚度为5 mm的条件下,通过调整大粒径和小粒径层的相对厚度来改变毛细芯厚度比,对平板型蒸发器环路热管启动和变工况运行进行实验测试。实验结果表明:在同一工况下,不同厚度比的双层毛细芯启动特性存在显著差异,启动过程中出现小粒径层蒸发效率低引起的温度过冲和环路热管中气液两相流变化导致的温度振荡;同时存在一个较优的双铜层毛细芯厚度比,大粒径(180～280μm)铜层厚度为3 mm可提高蒸发效率,小粒径(56～71μm)铜层厚度为2 mm可提供足够毛细抽吸力保证环路热管稳定运行。搭载该厚度毛细芯的环路热管不仅启动速度快(125 s),而且总热阻和蒸发器壁面温度均最低,最大加热功率达到120 W(21.10 W/cm~2),对应热阻为0.17 K/W。     

基于滑模的运载器主动段俯仰通道姿控系统设计

与传统比例-积分-微分（PID）控制方法相比，滑模控制（SMC）方法可以比较容易地将不确定性纳入控制器设计中，从而增强系统的鲁棒性。探索了SMC技术在运载器主动段姿态控制中的工程应用，首先通过分析基于趋近律的SMC系统，提出了降低不连续切换项系数的需求，然后研究了基于干扰上界的SMC方法。三通道小偏差仿真结果验证了两种方法的控制效果，表明第2种控制器的鲁棒性更好，稳态误差小，同时发动机喷管摆角需求较小。     

煤矿井下避难硐室系统的构建与应用分析

为进一步减少煤矿事故发生后的人员伤亡、财产损失，在分析国内外煤矿井下避难系统发展的基础上，以何家塔煤矿井下避难硐室系统的构建设计与应用为例，详细介绍了井下避难硐室系统的分类、结构构成、功能需求和配套设施等，并通过紧急避险疏散时间的校验计算，提出避难硐室距离采掘工作面以不超过1 000 m为宜，且应按照“地面最安全，先逃生后避险”原则进行避险救援，为国内其他矿井避难硐室的构建应用和相关标准的制定提供了参考。     

Combined constant speed control method for a wind generator equipped with hydraulic energy storage

A wind generator equipped with hydraulic energy storage (WG‐HES) uses hydraulic transmission systems instead of gearbox transmissions, thus eliminating high‐power converters and reducing the tower‐top cabin weight. When there is no wind or the wind speed is extremely low, the pressured oil released by accumulators is used to drive a motor to operate at a constant speed, thereby generating constant‐frequency power. However, few studies have examined the constant speed control characteristics for generating electricity using only an accumulator group. In this study, a combined constant speed (CCS) proportional–integral–derivative (PID) control method based on “variable displacement and throttling” is proposed, which includes two closed loops and one regulating loop. First, a simulation model of the CCS PID control method for a variable motor was established in the Simcenter Amesim program. The influence of different PID parameters on the anti‐interference ability of the constant speed control of the motor was analyzed under a given load step. Then, we obtained the range of control parameter values and a set of optimal values. Second, the effectiveness of the CCS control method and the accuracy of the simulation results were verified on a 600‐kW WG‐HES system prototype. The results verified that the CCS control method has good anti‐interference ability and can meet the requirements of constant speed control for a variable motor under the best PID parameters. These results can provide a basis for developing control strategies for WG‐HESs when there is no wind or at low wind speeds.     

三液相酶催化体系水解橄榄油的研究

采用三液相酶催化体系水解橄榄油,考察构成三液相体系的物质对酶的影响;考察了硫酸铵的含量和PEG400的含量对酶的分配分数、回收率及催化效率的影响,研究了中下相与油的体积比对水解橄榄油的影响,并初步探究了三液相体系水解橄榄油的微观液滴结构。结果表明:在酶添加量142.5 U/g、硫酸铵含量15%、PEG400含量28%、中下相与油的体积比3∶1、转速200 r/min条件下,酶的分配系数达到28.28,酶的回收率达99.65%,水解24 h后,脂肪酸含量达98.17%,在对照(油水体系)中,相同条件下产生的脂肪酸含量仅为42.06%。显微镜下液滴观察结果表明,三液相体系中独特的液滴结构可能是该体系优于油水两相体系的原因。     

Space mapping-assisted optimization of a thin-walled honeycomb structure for battery packaging

Structural and Multidisciplinary Optimization - A new thin-walled honeycomb structure for Li-ion battery packaging is designed and optimized in this study. Compared with other battery packaging...     

Learning an Evolutionary Embedding via Massive Knowledge Distillation

International Journal of Computer Vision - Knowledge distillation methods aim at transferring knowledge from a large powerful teacher network to a small compact student one. These methods often...     

New doctors ranking system based on VIKOR method

Nowadays, we can use different websites that help us make decisions about various aspects of our lives. However, privacy protection prevents websites from providing personalised guidelines to users. We propose a novel doctor‐ranking system (DRS) based on multi‐criteria group decision‐making (MCGDM) method to address the problems of privacy protection. The following aspects differentiate our proposed DRS model from previous works: (a) textual information reviews are used to identify user preferences and complementary criteria, (b) criteria weights are determined by term frequency inverse document frequency (TF‐IDF) instead of Delphi method or expert opinion, (c) intuitionistic fuzzy sets (IFSs) are used to replace sentiment analysis to express subjective user criteria, and (d) VIsekriterijumsko KOmpromisno Rangiranjie (VIKOR) method for MCGDM with IFSs is used to solve the doctor‐ranking problem. We apply our proposed model to datasets from Haodf.com to compare the performance of our method with that of sentiment analysis and technique for order performance by similarity to ideal solution (TOPSIS) methods. The experimental results show that our method provides accurate ranking and increases the reliability of DRS.     

Ultra-stable K metal anode enabled by oxygen-rich carbon cloth

The K metal batteries are emerged as promising alternatives beyond commercialized Li-ion batteries. However, suppressing uncontrolled dendrite is crucial to the accomplishment of K metal batteries. Herein, an oxygen-rich treated carbon cloth (TCC) has been designed as the K plating host to guide K homogeneous nucleation and suppress the dendrite growth. Both density function theory calculations and experimental results demonstrate that abundant oxygen functional groups as K-philic sites on TCC can guide K nucleation and deposition homogeneously. As a result, the TCC electrode exhibits an ultra-long-life over 800 cycles at high current density of 3.0 mA·cm⁻² for 3.0 mA·h·cm⁻². Furthermore, the symmetrical cells can run stably for 2,000 h with low over-potential less than 20 mV at 1.0 mA·cm⁻² for 1.0 mA·h·cm⁻². Even at a higher current of 5.0 mA·cm⁻², the TCC electrode can still stably cycle for 1,400 h.